Features:
1) Fully compliant with IEEE802.3, IEEE802.3u and IEEE802.3ab
2) Supports NWAY, auto-negotiation on each port senses the link speed
of a network device (10, 100 or 1,000Mbps) and intelligently adjusts for
compatibility and optimal performance, plug and play
3) Supports IEE802.3x flow control for full-duplex mode, and back pressure
flow control for half-duplex mode
4) Backplane bandwidth up to 8.8Gbps, support non-blocking full wire-speed
throughput
5) Store and forward architecture, 8K MAC address table and MAC address
auto-learning
Specifications:
1) Protocol and standards: IEEE802.3, IEEE802.3u, IEEE802.3ab
2) Ports:
a) 24 10/100Mbps RJ45 ports with auto MDI/MDI-X, auto-negotiation
b) Two 10/100/1000M RJ45 ports with auto MDI/MDI-X, auto-negotiation
3) Network media:
a) CAT 5 UTP for 1,000Mbps
b) CAT 3 UTP for 10Mbps
c) For transmission speed of 1,000Mbps, CAT 5 UTP recommended
4) Transmission method: store-and-forward
5) LED indicator:
a) 10/100M port: 1 Link/Act (link/transfer), one 100M (speed)
b) 10/100/1000M port: 1 link/act, one 1,000M (speed), one 100M (speed)
b) Power, SYS
6) Dimensions (W x D x H): 140 x 440 x 44mm
7) Standard 19-inch rack-mountable, I U height
8) Operating temperature: 0~40°C (32~ 104°F)
9) Storage temperature: -40~70°C (-40~157°F)
10) Operating humidity: 10~90% RH, non-condensing
11) Storage humidity: 5~90% RH, non-condensing
12) Internal power supply: AC 100-260V 50/60Hz
13) Power consumption: 20W max.
