This model consists of:
1) 1 ECU (Electronic Control Unit) with 1.2m power cable
2) 4 ultrasonic sensors with 2.5m cable
3) 1 night-view camera with cable
4) 1 rear-view mirror with built-in 6'' TFT-LCD monitor and speaker, plus 1 remote
control and 5m cable
5) Accessory: user's manual, 1 double-sided adhesive tape, 2 quick-on cable
clips, & 2 drill bits
Overview:
The 4 sensors and 1 camera are installed in rear bumper. The ECU installed in the
trunk gets power from reverse light. The mirror with built-in 6'' TFT-LCD monitor
can be attached very easily with its 2 tensible clips to the vehicle's original
rearview mirror. The mirror with anti-glare function serves as normal rearview
mirror, when the monitor is powered off. The monitor with an extra video input
can be connected to DVD, VCD or other visual equipments, and will be activated
automatically when reverse is engaged. During car reverse, monitor shows not only
the image behind vehicle, but also the direction of obstacle and the distance from
bumper to obstacle, if any. After reverse is shifted, the monitor displays image
from the other visual source, if there was.
Features:
1) Top sensitivity: a person around 1.7m behind vehicle or an ordinary .cable
can be detected with fast reaction
2) Min. detecting distance: 20cm
3) Minimized false alarm and jitter-free display with perfect image
4) Workable at low temperature condition: -25
oC
5) Latest design of fashionable shapes
6) High stability based on reliable design and the use of high-quality components
7) Optimized design for easy installation
Technical data:
1) Monitor: 6" (16:9) TFT-LCD with PAL/NTSC switchable
2) Resolution: 800 x RGB x 480 pixels ual video Input
3) Working voltage: 10~16VDC
4) Rated voltage: 12V DC
5) Max. power: 10W
6) Max. display distance: 2.5m
7) Min. display distance: 0.20m
8) Max. alarm distance: 1.7m
9) Alarm volume: mute, 70/90dB (at 1.0m) adjustable
10) Working temperature: -25 ~ +70
oC
