Specifications:
1) Dimensions: 2,500(L) x 1,500 (W) x 1,900 (H)mm
2) Weight: about 4,000kg
3) Electricity: 380V, 9kW
4) Air consumption: 7kgf x 300l/min
5) Number of worker: 1 person
border=0>
Operation:
It is a fully automatic grinding, sharpening and honing M/C for the cut end of the
cannula to be processed into 3 face cutting. The procedure is as follow; after
setting of the jig with the tape-patched cannulas on to the setting table. It is
automatically ground, sharpened and honed.
Other need machine for cannula manufacturing:
1) Automatic tube cutting machine
2) High pressure water jet spray machine
3) Burr removing machine
4) Vibratory barrel cleansing machine
5) Tapping machine
6) Cannula tip horning machine
7) Electrochemical polishing machine
8) Acid washing machine
9) Neutralizing machine
10) Ultrasonic cleaning machine
11) Drying oven
Copyright Disclaimer:
Contents of
"Cannula Manufacturing Line" are from the Internet, the copyright belongs to the
original page. Check the original page for copyright statement.
