Specifications:
1) Production rate: 100kg/h (nominal), 50kg/h (recommended)
2) Weight of lap or tuft web: 300 - 1,000g/m
3) Sliver weight: 3 - 8g/m
4) Max. delivery speed: 300m/min
5) Feeding way: forward feeding (reverse feed table)
6) Revolving flats (working / total): 28 / 84 (with a difference of 0.56mm
between heel and toe)
7) Stationary flats:
a) 10 on the feed side of cylinder
b) 8 on the delivery side of cylinder
c) Coupled with 2 trash masters at each side
8) Doffer speed control: inverter, infinitely variable (end-forming at a lower
speed)
9) Total draft: 68 - 300
10) Compressed air consumption: 0.3 cubic meters per hour, air pressure: 0.7MPa
11) Suction air volume: 4,200 cubic meters per hour, resistance in suction
port over -1,000Pa
12) Exhaust of card sweep: by conveyor lattice or enforced suction (optional)
13) 13 suction points:
a) Licker-in exhaust hood
b) 2 licker-in suction points
c) Flat cleaning
d) 4 trash masters
e) 2 flat inlet and outlet
f) Stripper cleaning
g) Flat back
14) Can sizes: dia.: 600 x 1,100mm, dia.: 900 x 1,100m (optional)
15) Installed power: 7.64kW
a) Motor for main drive: 4kW
b) Motor for doffer: 1.5kW
c) Motor for brush roll: 0.37kW
d) Motor for flat cleaning ends: 0.05kW x 2
e) Motor for coiler: 0.75kW
f) Motor for flat drive: 0.37kW
g) Motor for flat cleaning roll: 0.55kW
16) Wire: Chinese wire (standard), Kanai, Ecc, Graf (optional)
