The rf modules (wap200a) is high performace transceiver (rx & tx channel) designed for PCB mounting that will be integrated into a user system. It can be regarded as a wireless component for part of an electronic system. A simple wire can be soldered to the antenna input or the antenna can be printed on the PC board.
Frequency 414.995MHz-444.061MH
Channel 16(User could alternate the frequency)
Modulation FSK
Voltage DC 2.5V ~ 3.6V
Receiving Current < 24mA
Transmit Current < 43mA
Sleep Current < 2uA
Sensitivity 2400bps 9600bps 19200bps
-108dBm -103dBm -100dBm
Interface RS232/TTL
Hopping hardware hopping
Working Temperature -40 degree C ~ +85 degree C
Humidity 10%-90%
Dimension 20mm*40mm*7mm
Copyright Disclaimer:
Contents of
"Embedded Rf Module (Rx & Tx) " are from the Internet, the copyright belongs to the
original page. Check the original page for copyright statement.
