Specifications:
Hand section:
1) CPU: 32 bits ARM-based RISC CPU, running frequency 60MHz
2) Program memory:
a) 16Mbit flash memory (expanded to 512Mbit)
b) Run extensity 64Mbit SDRAM (expanded to 128Mbit)
3) Data memory: 4Mbit SRAM (expanded to 256Mbit)
4) Display: 128 x 64 pixels and EL backlight
5) Key: 11 numeric keys and 8 functional keys
6) Magnetic card reader:
a) Accords with GB/T15120 (ISO7811) standards
b) Magnetic stripe 2/3, 1/2 or 1/2/3
7) IC card reader/writer:
a) Accords with GB/T16649 (ISO7816) standards and EMV2000
b) 1 user card and 1 merchant card
c) Async/sync T=0 and T=1, supports synchronization
8) PSAM: 3 SIMS:
a) Accords with ISO7816 standards and EMV2000
b) Async/sync T=0 and T=1, supports synchronization
9) Communication port: GSM/GPRS (optional), supports TCP/IP
10) External port: 1 RS232 and 1 IRDA
11) Printer: high speed thermal line printer, with printer width of 57.5mm
and speed of 50mm/s
12) Power: high capacity lithium battery 2,200mAh
13) Environment:
a) Operating temperature: 41F to 104F
b) Relative humidity: 20%-90%
14) Dimensions: terminal 200 x 101 x 50mm
15) Security: DES/3DES/RSA
Pedestal section:
1) CPU: 32 bits ARM-based RISC CPU, running frequency 60MHz
2) Program memory:
a) 16Mbit flash memory (expanded to 512Mbit)
b) Run extensity 64Mbit SDRAM (expanded to 128Mbit)
3) Communication:
a) Accords with CCITT V.22bis/Bell 212A internal modem, 33.6K
b) Supports async/sync communication ISO8583/visa I/II, Ethernet,
TCP/IP, GSM, GPRS
4) Key: advance and retreat paper keys
5) External port: 2 RS232, 1 I2C bus, 1 Ethernet and 1 IRDA
6) Printer: high speed impact dot matrix printer with speed of 4 rows/s
7) Power: AC 110V-220V 50Hz
8) Dimensions: 254 x 151 x 120mm
9) Environment:
a) Operating temperature: 5°C-40°C
b) Relative humidity: 20%-90%
