Features:
1) Input:
a) Voltage: 95~132V/180~264V
b) Frequency: 47~63Hz
c) Current: 3A (max.) at 230VAC, 6A (max.) at 115VAC
d) Inrush current: <80A at 230VAC cold start at 25 degrees
e) Efficiency: 70% min. at full load 230VAC / 50Hz, 65% min. at
450W load 20VAC / 50Hz
2) Output: 450W
a) Voltage: +5V +3.3V +12V +12V-12V/ +5VSB, 32A, 28A, 15A, 17A,
0.5A, 2.0A
b) Ripple: 50mV, 80mV, 120mV, 150mV, 150mV, 50mV
c) Noise: 80mV, 80mV, 240mV, 300mV, 300mV, 80mV
d) Power good single: 100ms~500ms (80% full load)
e) Power fail signal: 0.1ms~100ms (80% full load)
f) Hold-up time: 16ms min.
g) Line regulation: 1% max.
3) Protection:
a) Over load: 120%~160%
b) Sense level: +3.3V +5V +12V or over voltage: 4.3V max. / 6.8V
max. /15.6V max.
c) Short circuit: except for +5VSB all output
4) Hi-pot voltage 1,500VAC, time 2-3 sec. cut off current 10mA max.
Packing:
Standard packing
