This is a series of a radio frequency super-regenerative receiver module which can facilitate the OEM designers to design their applications in remote control in the quickest way. The circuit is designed with SMD components and the module size is small enough to be able to be fitted in almost any application. The decoder function has been implemented in the on-board microprocessor. Besides, the code learning has also been implemented. Thus it relieves the system design load on the remote control part totally. Spec. is as under:
1. Center Frequency : 433.92 MHz
2. Modulation : AM
3. Sensitivity : -107dBm
4. Power : 5V DC
5. Data Rate : 2.5K/S
6. Bandwidth : 12 M at -20 dbm
7. Current Consumption: 2mA (Min.) 4mA (Max.)
8. Work with 2 / 4 / 6 buttons fixed / rolling code transmitters programmed by Automicro/ Microchip HCS200 series + AMI own encryption key
9. PCB size : 54mm x 18.6mm
Copyright Disclaimer:
Contents of
"Rf Receiver Module (With Shielding Optional) " are from the Internet, the copyright belongs to the
original page. Check the original page for copyright statement.
