Load the material for grinding evenly and continuously into the grinding chamber
of the main frame. Due to the centrifugal force in rotation, the roller swings outward
and presses closely upon the ring. The shovel carries the material to the space between the roller and ring. When the roller rolls, the material is thus ground.
After being ground, the material is routed to the sorter along the wind belt of the
blower and the coarse powder will be put back to the mill for regrinding. The fine
powder flows into the cyclone collector together with airflow and is expelled
from the discharge pipe as final product.
In the grinding chamber, since the material may contain moisture to some extent,
the heat generated during grinding makes the moisture evaporated and the pipeline
joints are not airtight, the external air is sucked in and the circulation air amount
increases. In order to enable the mill to work under negative pressure, the
increased airflow is guided to the deduster anew sequentially to the atmosphere
after purification.
Copyright Disclaimer:
Contents of
"Super Mirco Grinder Mill" are from the Internet, the copyright belongs to the
original page. Check the original page for copyright statement.
