Product overview:
1) All-solid-state device with MPU
2) Monitors and modulates AC sine waves continually
3) Installation of UPC-D is flexible and easy
4) High investment return rate
5) Shell has good ventilation and can adapt to the severe industrial
environment
6) Power saving, improves power factor and balances the output power
effectively through the unique software
7) Rated voltage: 220VAC
8) Single phase, 50 / 60Hz
9) Rated capacity: 16 - 250A
10) Power saving rate: up to 50% four stage adjustable
11) 99 minutes after power on (can be changed at any moment) the power
saving state will be active, allowing a sufficient startup and warm-up time
for light bulb and ballast
12) With green LED diagnosis indicator
13) Applicable to pure or mixed light sources such as solar lamps, high
intensity discharge lamps, incandescent lamps
14) Non-phase control patent, and will not produce any high order frequency
harmonic waves
15) Automatic power saving, does not require special care and maintenance
16) Long service life up to 15 years
The model selection of UPC-D:
1) According to information from on-site, the appropriate product model
should be selected based on different lamplight types and capacity sizes
2) For the selected model, please refer to the table of UPC-D product
applicable object and scope
3) The basic principle is: try to choose the model whose rated capacity
is near to the real capacity of lamplight circuitry so as to get the
best investment payback
4) Overload should be avoided, which will affect the service life of the
product or even result in accidents
Applicable object and scope:
1) There are various lamplight series products
2) Applicable object and scope of each product are different
3) Therefore, client must distinguish these differences when choosing
products (we offer consultation)
4) The applicable object and scope of different products can be seen from
the following table
