Universys
The universys, a fully automatic card transport system, is especially designed for the personalisation of single cards.
It combines both coding with security technology - separation, rotation, ink jet, hot stamping or label and stacking modules with cameras. Thus it meets a wide variety of personalisation requirements.
The range of application covers addresses, personal data, pin numbers, barcodes, serial numbers, expiry data as well as scratch-off strips covering secret data. Integrated cameras guarantee safe and correct data handling. Due to its modular, tailor-made design the universys is perfectly suited for the individualization of tags, membership cards, prepaid cards, magnetic stripe and chip cards, etc.
The universys standard model comprises the following modules:
Separation module
Separates ISO standard cards by friction. Designed for material thickness from 32 mil _ 40 mil(02 _ 1 mm).
Rotation module
Turns the cards from portrait to landscape allowing coding in
Both directions.
Print module
Equipped with 2 alphajetc print heads. It can be upgraded to 4 print heads.
Integrated code camera to check all relevant printing information for correct data handling.
Hot stamping module
The metronic hot stamping unit m06 covers data with scratch-off foil up to a maximum of 400 mm2.
Capacity up to 7,200 cards/hour.
The module can also be equipped with the labeller as a customer option.
In addition a second camera is available to check for the presence of scratch-off strips.
Stacking module
Includes a metronic standard conveyor belt and a reject station.
Technical data:
Printing system:
Alphajetc continuous inkjet system
Printing units:
1 alphajetc with 2 print heads each module up to three heads controllable and synchronizable per module
Printing resolution: Max.48 dots in vertical direction per print head
Printing height:0.031 mm _ 0.59/0.8 mm _ 15 mm(upto 6 lines) per print head
Card material: ABS, pet, laminated and natural PVC, paper cards
Card size: ISO standard 3.4 x 2.1(86x 54 mm)
Capacity:500-card magazine(cardthickness of 32 mil/0.8 mm)
Printing speed: With hot stamping unit up to 7,200 cards/hour
With labelling unit up to 12,000 cards/hour
On material)
Dimensions of basic unit
Modules):8.73 x 5.78 x 5.48 ft closed/6.79 ft open
660 x 1,700 x 1,650 mm closed/2,070 mm open)
X w x h)
Operating height: Approx.3.15 ft(960mm)
Air connection:6 bar,1/4
Supply voltage:230 v(115v),50/60 hz
Power input(basicunit):4 a(8a)
Temperature range: +15 c to +35 c
Air humidity: Relative humidity 80% maximum, non-condensing
Protection against
Ingress of liquids:
Splash-proof, ip20
The operating panel)
